052-6317 rev b 6 - 2009 product benefits soft switching - high q rr low noise switching - reduced ringing higher reliability systems minimizes or eliminates snubber product features ultrasoft recovery times (t rr ) popular to-247 package or surface mount d 3 pak package ultra low forward voltage low leakage current product applications anti-parallel diode -switchmode power supply -inverters applications - induction heating resonant mode circuits -zvs and zcs topologies - phase shifted bridge apt75dl60b(g) apt75dl60s(g) 600v 75a *g denotes rohs compliant, pb free terminal finish. maximum ratings all ratings: t c = 25c unless otherwise speci ? ed. 1 - cathode 2 - anode back of case - cathode 1 2 t o - 2 4 7 1 2 d 3 pak 1 2 (s) (b) microsemi website - http://www.microsemi.com ultrasoft recovery recti ? er diode symbol characteristic / test conditions ratings unit v r maximum d.c. reverse voltage 600 volts v rrm maximum peak repetitive reverse voltage v rwm maximum working peak reverse voltage i f(av) maximum average forward current (t c = 112c, duty cycle = 0.5) 75 amps i f(rms) rms forward currrent (square wave, 50% duty) 121 i fsm non-repetitive forward surge current (t j = 45c, 8.3 ms) 320 t j , t stg operating and storage junction temperature range -55 to 175 c t l lead temperature for 10 seconds 300 symbol characteristic / test conditions min typ max unit v f forward voltage i f = 75a 1.25 1.6 volts i f = 150a 2.0 i f = 75a, t j = 125c 1.25 i rm maximum reverse leakage current v r = 600v 25 a v r = 600v, t j = 125c 250 c t junction capacitance, v r = 200v 69 pf static electrical characteristics downloaded from: http:///
apt75dl60b_s(g) dynamic characteristics 052-6317 rev b 6 - 2009 thermal and mechanical characteristics microsemi reserves the right to change, without notice, the speci? cations and information contained herein. symbol characteristic / test conditions min typ max unit t rr reverse recovery time i f = 1a, di f /dt = -100a/ s, v r = 30v, t j = 25c 56 ns t rr reverse recovery time i f = 75a, di f /dt = -200a/ s v r = 400v, t c = 25c 460 q rr reverse recovery charge 2174 nc i rrm maximum reverse recovery current 11 amps t rr reverse recovery time i f = 75a, di f /dt = -200a/ s v r = 400v, t c = 125c 597 ns q rr reverse recovery charge 4326 nc i rrm maximum reverse recovery current 15 amps t rr reverse recovery time i f = 75a, di f /dt = -1000a/ s v r = 400v, t c = 125c 355 ns q rr reverse recovery charge 7215 nc i rrm maximum reverse recovery current 42 amps symbol characteristic / test conditions min typ max unit r jc junction-to-case thermal resistance 0.40 c/w w t package weight 0.22 oz 5.9 g torque maximum mounting torque 10 lbin 1.1 nm 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 10 -5 10 -4 10 -3 10 -2 10 -1 1.0 10 rectangular pulse duration (seconds) figure 1. maximum effective transient thermal impedance, junction-to-case vs. pulse duration peak t j = p dm x z jc + t c duty factor d = t 1 / t 2 t 2 t 1 p dm note: z jc , thermal impedance (c/w) downloaded from: http:///
052-6317 rev b 6 - 2009 apt75dl60b_s(g) typical performance curves 0 20 40 60 80 100 120 140 160 0 1 2 3 0 100 200 300 400 500 600 700 800 0 200 400 600 800 1000 case temperature (c) figure 7, maximum average forward current vs. case temperature -di f /dt, current rate of change (a/ s ) figure 5, reverse recovery current vs. current rate of change 0 20 40 60 80 100 120 140 160 25 50 75 100 125 150 175 0 5 10 15 20 25 30 35 40 45 50 0 200 400 600 800 1000 0 0.2 0.4 0.6 0.8 1.0 1.2 0 25 50 75 100 125 150 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 0 200 400 600 800 1000 i rrm q rr t rr 150a 75a 37.5a 75a t j = 55c t j = 150c v f , anode-to-cathode voltage (v) figure 2, forward current vs. forward voltage i f , forward current (a) t j = 25c t j = 125c -di f /dt, current rate of change (a/ s ) figure 3, reverse recovery time vs. current rate of change t rr , collector current (a) q rr , reverse recovery charge (nc) t j , junction temperature (c) figure 6, dynamic parameters vs junction temperature k f , dynamic parameters (normalized to 1000a/ s) i rrm , reverse recovery current (a) i f(av) (a) 0 100 200 300 400 500 600 700 1 10 100 400 v r , reverse voltage (v) figure 8, junction capacitance vs. reverse voltage c j , junction capacitance (pf) t j = 125c v r = 400v t j = 125c v r = 400v -di f /dt, current rate of change (a/ s ) figure 4, reverse recovery charge vs. current rate of change t j = 125c v r = 400v 75a 37.5a 37.5a 150a 150a downloaded from: http:///
apt75dl60b_s(g) 052-6317 rev b 6 - 2009 4 3 1 2 5 5 zero 1 2 3 4 di f /dt - rate of diode current change through zero crossing. i f - forward conduction current i rrm - maximum reverse recovery current. t rr - reverse r ecovery time, measured from zero crossing where diode q rr - area under the curve defined by i rrm and t rr . current goes from positive to negative, to the point at which the straight line through i rrm and 0.25 i rrm passes through zero. figure 9. diode test circuit figure 10, diode reverse recovery waveform and definitions 0.25 i rrm current transformer di f /dt adjust d.u.t. +18v 0v t rr / q rr waveform slope = di m / dt 6 di m /dt - maximum rate of current increase during the trailing portion of t rr. 6 v r to - 247 package outline d 3 pak package outline 15.85 (.624)16.05(.632) 18.70 (.736)19.10 (.752) 1.15 (.045)1.45 (.057) 5.45 (.215) bsc(2 plcs.) 4.90 (.193)5.10 (.201) 1.45 (.057) 1.60 (.063) 2.70 (.106)2.90 (.114) 0.40 (.016)0.65 (.026) dimensions in millimeters (inches) heat sink (cathode)and leads are plated 2.40 (.094)2.70 (.106) (base of lead) cathode(heat sink) 1.90 (.075)2.10 (.083) cathode anode 0.020 (.001)0.250 (.010) 1.20 (.047)1.40 (.055) 12.40 (.488)12.70 (.500) 13.30 (.524)13.60(.535) 1.00 (.039)1.15(.045) 15.49 (.610)16.26 (.640) 5.38 (.212)6.20 (.244) 6.15 (.242) bsc 4.50 (.177) max. 19.81 (.780)20.32 (.800) 20.80 (.819)21.46 (.845) 1.65 (.065)2.13 (.084) 1.01 (.040)1.40 (.055) 10.90 (.430) bsc 3.50 (.138)3.81 (.150) 4.69 (.185)5.31 (.209) 1.49 (.059) 2.49 (.098) 2.21 (.087)2.59 (.102) 0.40 (.016)0.79 (.031) dimensions in millimeters and (inches) cathode anode cathode e1 sac: tin, silver, copper e1 100% sn downloaded from: http:///
|
